PicoTurbine Windmill Assembled
This kit has been used by thousands of students, home schoolers, and even adult
hobbyists to learn about wind power and do energy science fair projects.
It's been used by major universities such as MIT and Caltech, as well as the National Renewable Energy Laboratory (NREL) for summer youth programs.
Do fun renewable, solar energy science fair projects, science reports, or just plain interest!
Advanced Deluxe Solar Electricity Education Kit
|
Wind + Solar = Powerful Hybrid Renewable Energy!
|
With the PicoTurbine Windmill Kit will build
a fully functioning, electricity-producing scale model of a wind turbine.
The windmill stands 8" tall, produces between 1.7 and 2.5 volts which can light up a bicolor LED
(included) that flashes red and green to show the alternating current produced.
The kit can be easily built in under one hour, less time if used as a group project.
It is the only kit of its kind to demonstrate the power of
wind as a renewable energy resource.
Test different wind turbine blade configurations, various generator components,
the effects of changing wind speeds, or other experiments that are only limited by your imagination.
Each kit includes all the parts you need:
- Four strong magnets (ceramic grade 5-1"x1.75" x 0.25")
- Pre-wound enamel coated copper wire into 4 coils. This saves about 30 minutes from typical project build time over wrapping your own!
- Two feet of 10 gauge aluminum wire for the yoke
- One bi-color light emitting diode LED (red and green) - 2 leads
- A piece of 8" longwooden dowel, sharpened on one end to use as the axel
- A 5" by 8" by 1/2" thick piece of plywood used as a base for the project
- 3-phillips head cross slot screws
- One piece corrugated cardboard about 8" by 10"
- Three retaining lips (small semi-circular metal e-clips)
- One strop of pre-cut double-sided tape pads
- One samll piece of sandpaper for stripping copper wire
- Instruction booklet, including teacher's guide and technical notes.
- Paper templates for cardboard cutout pieces
- The Manual contains classroom ideas and experiments,
as well as technical notes for older students or adult experimenters.
All you must provide are some easily found tools and materials:
Gluestick or glue
A Phillips' screwdriver and scissors
|
|
The Advanced Deluxe Solar Educational Kit teaches you how to convert sunlight into electricity.
Science Fair Project Ideas
Make a solar circuit.
Make an electrical circuit.
Learn how to increase voltage.
Learn how to increase current.
Learn how to make a solar panel
The solar cell comes with eight solar cells, propeller, electric motor, light bulb, buzzer, wire and hardware.
Use solar power to produce the energy for a radio, battery charger, calculator or 1.5V cassette player
The instruction manual teaches the concepts of solar electricity and gives experiments. Information includes how to connect solar cells to achieve variations in theory of solar cell construction, voltage and current, and basic circuit concepts.
|
Did you know that the first commercial patent for a solar water heater went to Clarence Kemp of the US in 1891. This system was bought by two California executives and installed in one-third of the homes in Pasadena by 1897?
Warning for all kits on this page.
|
